instructions for a successful installation process with the Von Duprin 99 series device and trim.
Overview of the Von Duprin 99 Series
The Von Duprin 99 series is a type of exit device that provides a secure and reliable way to exit a building. According to the installation instructions, the Von Duprin 99 series is a rim exit device that is designed for use on metal or wood doors. The device is available in a variety of finishes, including satin chrome, and is non-handed, meaning it can be installed on either a left-hand or right-hand door. The Von Duprin 99 series is also available with various trim options, including a wide stile pushpad and a less trim design. The device is designed to be easy to install and maintain, with a hex key dogging option and a non-keyed cylinder type. Overall, the Von Duprin 99 series is a versatile and reliable exit device that can be used in a variety of applications, including commercial and industrial buildings. The series includes several models, such as the 99EO, which is a grade 1 rim exit device.
Pre-Installation Requirements
Pre-installation requirements include reading
- manuals
and checking door specifications carefully before starting.
Door Preparation and Specifications
Door preparation is a crucial step in the installation process, requiring careful attention to detail to ensure a successful installation. The Von Duprin 99 series device is designed for use on metal or wood doors, with a minimum stile size of 3-5/8 inches. The door width should be between 28 and 36 inches, and the door thickness should be between 1-3/4 and 2-1/4 inches. It is essential to check the door specifications carefully before starting the installation process. A
- list
of required tools and materials should be gathered, including a drill, screws, and a hex key. The door should be prepared according to the manufacturer’s instructions, including marking the horizontal and vertical lines indicated in the exit device instructions. By following these steps, installers can ensure a proper fit and function of the Von Duprin 99 series device. The installation guide provides detailed information on door preparation and specifications.
Installation Process
Installation involves
- steps
to ensure correct device and trim functioning with the Von Duprin 99 series.
Locating and Marking Horizontal and Vertical Lines
To begin the installation process, it is essential to locate and mark the horizontal and vertical lines on the door, as indicated in the Von Duprin 99 installation instructions and template.
Using a template or guide, carefully mark the lines on the door, ensuring they are level and plumb.
This step is crucial in ensuring the correct alignment of the device and trim.
The horizontal line should be marked at the center of the door, while the vertical line should be marked at the point where the device will be installed.
It is also important to note that the lines should be marked on both sides of the door to ensure accuracy.
By following these steps, you can ensure that the horizontal and vertical lines are correctly located and marked, providing a solid foundation for the rest of the installation process.
The use of a level and a straightedge can also help to ensure accuracy and precision.
Additionally, it is recommended to double-check the markings to avoid any errors or mistakes.
The correct location and marking of these lines are critical to the successful installation of the Von Duprin 99 series device and trim.
Drilling Holes and Avoiding Splintering
Drilling holes for the Von Duprin 99 series device and trim requires careful attention to avoid splintering the door.
Using a drill bit that is specifically designed for drilling into wood or metal, carefully drill the holes marked in the previous step.
It is essential to drill slowly and apply gentle pressure to avoid applying too much pressure, which can cause the door to splinter.
To avoid splintering, it is recommended to drill from both sides of the door, starting from the outside and working your way in.
This will help to prevent the door from splintering and ensure a clean and precise hole.
The use of a drill guide or template can also help to ensure accuracy and precision.
By following these steps, you can successfully drill the holes required for the Von Duprin 99 series device and trim without damaging the door.
It is also important to note that the holes should be drilled to the correct depth and diameter to ensure proper installation.
The correct drilling of holes is critical to the successful installation of the device and trim.
Device Alignment and Strike Center Lines
Proper device alignment with strike center lines is crucial for Von Duprin 99 installation using
- specific
instructions.
Aligning the Strike and Marking Slotted Holes
To ensure proper installation, align the strike on the center line and mark the two slotted holes, then use a pencil to mark the hole centers on the door.
The strike center line should be drawn horizontally, and the device center line should be drawn vertically, using a level to ensure accuracy.
Next, locate the slotted holes on the strike and mark them on the door, making sure they are aligned with the center line.
It is essential to double-check the alignment and markings to avoid errors during the installation process.
Using the correct tools, such as a drill and a screwdriver, will help to ensure a successful installation.
By following the manufacturer’s instructions and taking the time to properly align and mark the strike and slotted holes, you can ensure a secure and functional Von Duprin 99 exit device.
The installation process requires attention to detail and careful planning to avoid mistakes and ensure a smooth operation.
Proper alignment and marking of the strike and slotted holes are critical steps in the installation process.
Key Retraction and Latch Bolt
The key retraction and latch bolt mechanism is a critical component of the Von Duprin 99 exit device, requiring careful consideration during installation.
With the NL drive screw installed, the key retracts the latch bolt, securing the door in place.
The latch bolt is designed to engage with the strike plate, providing a secure and durable connection.
Proper installation of the key retraction and latch bolt mechanism is essential to ensure smooth operation and prevent potential issues.
The NL drive screw plays a crucial role in the key retraction process, and its installation must be done according to the manufacturer’s instructions.
By following the recommended procedures, installers can ensure a reliable and efficient key retraction and latch bolt mechanism.
The key retraction and latch bolt mechanism is designed to provide a high level of security and durability, making it an essential component of the Von Duprin 99 exit device.
The manufacturer’s instructions provide detailed guidance on the installation of this mechanism, and it is essential to follow them carefully to ensure a successful installation.
and Additional Resources
The Von Duprin 99 installation instruction is a comprehensive guide that provides detailed information on the installation process of the exit device.
The manufacturer’s website offers a range of resources, including installation manuals and technical specifications, to support installers and help them ensure a successful installation.
Additional resources, such as training videos and FAQs, are also available to provide further guidance and support.
The Von Duprin 99 exit device is a reliable and durable product that requires careful installation to ensure optimal performance.
By following the manufacturer’s instructions and using the available resources, installers can ensure a smooth and efficient installation process.
The Von Duprin 99 installation instruction is an essential tool for anyone involved in the installation of the exit device, and it is recommended that it be consulted thoroughly before starting the installation process.
The manufacturer’s website is a valuable resource that provides access to a range of information and support materials.